ApliTape 4700
Heavyweight Paper Application Tape

White translucent heavyweight saturated paper with low/medium rubber adhesive. Heavier paper provides easier handling during application and moisture resistance for wet applications. Alternative for 3M Brand SCPM-19.

Tech Data Sheet

Physical Specifications
Adhesive Rubber-based
Color White/Translucent
Caliper facestock 127 microns (5.0 mils)
Caliper facestock + adhesive 152 microns (6.0 mils)
Release Liner
Adhesion to Steel* 10-12 N/100mm (9-11oz.)
Tensile 332 N/100mm (19lb./in)
Elongation 12%
Tear Resistance 70-80
Light Transmission [3mm thick]
Gloss (60 degree angle)
Chemical Resistance
Shelf Life** 1 year
Base {tag_base}
Caliper (basestock)
Basis Weight
Gloss (75 degree angle)
BEKK Smoothness
Taber Stiffness
Temperature Limit (F)
Temperature Limit (C)
Chemical Resistance (Water)
Chemical Resistance (10% Nacl)
Chemical Resistance (38% H2S04)
Chemical Resistance (Ethanol)
Chemical Resistance (Aceton)
Surface pH
Surface Energy

  • Designed for printers, especially those using heat and vacuum processing.

    Will not lower high gloss printing due to flat even coating.
  • Adhesion to printed graphics does not build during prolonged storage.
  • User friendly. If adhesive touches adhesive, pulls apart with no adhesive delamination.
  • Removes easily following graphics application. Clean removal without hazing or discoloring.
  • Works well in either wet or dry applications with no adhesive transfer.
  • Unwinds easily all the way to the core for trouble-free handling and lamination to graphics.
  • Available in factory-cut rolls with no damaged edges for trouble-free unwind.

  • * Adhesion PSTC-101, 1 min dwell on stainless steel
    ** Stored at 22 0C / 50-55% RH

    Application Information

    Transfer Tape



  • Protective premask for graphics printed with UV inks and clear coats.
  • Excellent surface protection for stored screen printed graphics.

  • Printer Profiles

    Printer profiles are available on rtape.com.


    Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.